EMC Society
If you are looking for an EMC position in
If you are looking for EMC personnel, please send your position description to jobs@emcsociety.org and we will post the position below.
(Please let us know when to take your postings down)
This is a free service of the Southeastern Michigan IEEE EMC Society.
To access the IEEE EMC Society job posting list, please see: http://www.ewh.ieee.org/soc/emcs/career.html
More positions may be found at http://www.electromagneticcareers.com/ http://emcesd.com/jobs/jobpost.htm
and http://www.usajobs.gov
If you are an IEEE member, also check out https://careers.ieeeusa.org/
Resumes
Resume1 ; Resume2 ; Resume3 ; Resume4 ; Resume5 ; Resume6 ; Resume7; Resume8; Resume9; Resume10 ; Resume11 ; Resume12 ; Resume13; Resume14; Resume15; Resume16; Resume17; Resume18; Resume19; Resume20;
Positions
Posted 1/13/2012
|
RESPONSIBILITIES
REQUIRED SKILLS
Self-motivation, tenacity, and determination are very useful in this position.
RESPONSIBILITIES
REQUIRED SKILLS
Self-motivation, tenacity, and determination are very useful in this position. |
Lynne Kordich
Corporate Recruiter
Trialon Corporation
5600 New King Street #345
Troy, MI 48098
248-641-1007
Posted 1/12/2012
EMC Support Engineer
Roles and Responsibilities
Provide hardware and software design expertise and quality assurance in the support of automotive EMC validation efforts.
This includes the following:
- Keep abreast of current customer validation standards and requirements, particularly related to test support hardware including EMC simulators, harnesses, etc.
- Design EMC test support hardware and software.
- Maintain technical documentation related to design, development and fabrication of test support equipment.
- Manage fabrication/integration of test support equipment.
- Maintain knowledge of proper operational procedures of all test equipment including spectrum analyzers, EMC receivers, preamplifiers, quasi-peak adapters, signal/impulse generators, antennas, oscilloscopes, etc
- Participation and support of validation testing activities.
- Participate in validation design and review meetings.
- Support validation issue analysis, resolution and closure.
- Validation test setup, verification and signoff.
- Validation test report review and signoff.
Requirements
- At least 3 years automotive EMC experience
- BS in Electrical Engineering Required
- Circuit design experience.
- Software expertise in VB, Visual Studio, etc.
- Experience in PC based and/or embedded data acquisition systems.
- Automotive component loadbox and harness design and fabrication experience.
- Ability to communicate in a courteous and effective manner including answering questions, providing information with regard to standards, technical recommendations and requirements, etc.
- Ability to apply and understand advanced concepts of electrical and/or mechanical nature
- Working knowledge of Microsoft Office Suite
- Ability to plan and organize giving attention to detail and follow-through
- Must be able to work independently with out much guidance
- Shift and/or weekend work required as necessary.
Equal Employment Opportunity/Affirmative Action Employer M/F/D/V
Kathy Palazzolo
Senior Corporate Recruiter for TRW
Email: Kathy.Palazzolo-contr@trw.com
Phone: 1-248 699-4117
Posted 1/11/2012
Principal Engineer – Engine Hardware
- Drives and
guides architectural and design decisions.
- Analyze schematics and PCB layout for EMC design practices and guidelines
- Guides explanations and clarifies information to enable proper
interpretation and evaluation of very complex specifications, performance
characteristics or other technical
data.
- Develops recommendations for advanced new designs, new processes, or design
changes to meet requirements.
- Leads exploration of new concepts/solutions in area of expertise.
- Generates new ideas and intellectual property.
-Experience with power supply/motor design, analog
circuitry, microcontroller architectures, communication circuits, digital
I/O's.
Sr. EMC Design Engineer
-
Representing all EMC/EMI compliance disciplines for multiple products
- Evaluation of customer EMC requirements and procedures
- Development of EMC test plans as per customer requirements and guidelines
- Analyze schematics and PCB layout for EMC design practices and guidelines
- Perform on-site and off-site EMC/EMI validation/development testing
- Responsible for solving urgent and complex problems and evaluating
alternatives.
- Defines and implements best practices for EMC/EMI
- 5-10 years analog and/or digital hardware product experience
- 3 years minimum experience testing, designing and working with EMC/EMI
- Experience with power supply/motor design, analog circuitry, microcontroller
architectures, communication circuits, digital I/O's.
Electrical Engineer – Multiple Positions
- Design of
new circuits for Powertrain Electronics
- Perform circuit verification and validation
- Release project documentation for production builds
- Support new product launch
- Support design to cost activities
- Implement design changes to improve manufacturing
- Analyze warranty returns and Implement necessary design changes.
- Prototype troubleshooting
- Experience with microcontrollers
- Tolerance and worst case analysis methodologies
- Basic knowledge of EMC testing procedures and design for EMI compliance
- DFMEA methodology
- Proficiency in lab equipment such as Oscilloscope, power supply, waveform
generator, digital multi-meters
Please Contact:
Eli Davis
elidavis@movementsearch.com
248-778-0152
Posted 11/8/2011
BSME Entry Level 0-5 years’ experience Pro E this will be contract to hire convert fulltime salary $45,000 - 50,000
2 Program Managers (1 SR level $100,000 and 1 Mid-level $60,000)
Has proven capability in technical customer relations as evidenced by a minimum of 5 years customer service experience in the industry. Broad technical and analytical business skills as typically evidenced by completion of a bachelors or Masters’ degree or equivalent work experience. Excellent college level writing and speaking skills. In depth understanding of business functions including accounting and human resources. DoD experience
Sr. Engineer – EMI-FULLTIME
Location - Michigan
|
|
BSME or BSEE (minimum) from ABET accredited school 8 or more years EMC/EMI experience Experience testing military shelters to ASTM-E- 1851 a must Experience with IEEE Std 299 & C95 Mil-Std-461 experience a plus Should already have GROL Must be able to communicate (verbally and in writing) fluently to audiences representing a wide variety of skills, background, and disciplines Exceptional problem solving ability is essential |
|
In this position, you will be responsible for the growth of our EMI program. You will be involved with various product families and Product Engineers to validate and improve our products. The job entails hands-on testing and leadership of Technicians involved with testing. You will be expected be analytical and well organized. This position will be a significant part of the technological growth of our dedicated team working on exciting products with government customers. Perform and lead EMI testing for shelters and components. Write Test Plans and Test Reports. Research and Development. Assist Quality Control with production units Support Product Engineers with EMI compliant designs. Problem solving and root cause analysis. Develop processes and procedures for EMI testing/validation. Manage schedules for testing. Manage test site, manuals, procedures and equipment. Ensure safe work environment. Responsible for licensing with FCC. |
Cynthia Summers
VP of Sales
Executive Staffing Professionals,LLC (ESP)
csummers@executivestaffingprofessionals.com
214 418 4101
Posted 10/20/2011
Job Title: Sr. Engineer –EMI-Shelters
Department: Engineering
Reports To: Engineering Manager
SUMMARY: Designs, tests and provides guidance on EMI shielded products, processes or equipment, including specifications, assembly and manufacturing methods/sequence, for company products. Carries out analysis and testing of EMI components, assemblies and shelters. Consults and advises various product family leaders. May advice lower level non-exempt clerical and technical staff. Title may specify specialty.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Works independently to gather data and input on the development of original designs or adaptations of existing EMI designs after having been given specifications and/or requirements. Prepares and presents preliminary drawings, sketches or diagrams reflecting basic concept in order to obtain confirmation of approach, concept, and/or technique. Performs and leads EMI testing. Writes test plans and test reports. Develops and maintains processes and procedures for EMI testing and validation. Manages test site, manuals and equipment. Is responsible for FCC licensing. Conducts presentations with suppliers, customers and various internal departments to obtain input on, agreement with, and understanding of project objectives and schedules.
Participates in the initial studies and cost estimates for proposed projects. Prepares bill of materials and standards or specifications and participates in the development of project budgets, schedules, and release dates. Works with other departments for manufacturing, purchasing and quality control of products. Performs such individual assignments as supervisors and superiors may direct; ensures adequate and continuous controls are exercised over all assigned activities affecting quality; establishes and maintains effective work relationships within the department, the Corporation and the community; and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities.
SUPERVISORY RESPONSIBILITIES
Carry out supervisory responsibilities in accordance with policies and applicable laws. Responsibilities training employees; planning, assigning, and directing work; appraising performance; addressing complaints and resolving problems.
CORE COMPETENCIES
Organization Communication Initiative Critical Thinking Active Listening Time Management Reading Comprehension Complex Problem Solving Mathematics Judgment and Decision Making Active Learning Analytical Thinking
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be a US Citizen
EDUCATION and/or EXPERIENCE
BSME or BSEE from ABET accredited school or equivalent
8 or more years EMI/EMC experience.
Experience with IEEE Std 299 & C95, MIL-STD-461 and ASTM-E-1851
Should already have General Radio Operators License (GROL)
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Occasionally lifts and carries up to 50 pounds.
Some of work time is spent standing, lifting, and bending.
Works at telephone answering equipment, design equipment, and at a PC.
Works within a manufacturing and office setting and is occasionally exposed to heat, cold wet, EM/RF fields and fumes/chemicals.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Robert "RJ" Regan
Account Director
JBL Resources
Office: (616) 855-4600
Cell: (616) 291-3777
Fax: (888) 891-3607
Website: www.jblresources.com
Email: rjregan@jblresources.com
Posted 9/23/2011
Chicago area company is taking applications for an opening on our technical staff for a testing engineer position. Candidate should have experience performing EMI/EMC tests, including FCC, CE, MIL STD, RTCA, Automotive, and other related EMI/EMC specifications. NARTE certification a plus. EE degree or equivalent . Salary will based on experience and availability.
Interested candidates can send resumes to
engineeringopportunity1@yahoo.com
Posted 10/10/2011
The area: Engineering
Google's global deployment of custom-designed machines has created one of the largest and most powerful computing infrastructures in existence: cutting-edge innovation on a huge scale. The Platforms team designs and builds the software, hardware, computing platform and networking technologies that power all of Google's services.
The role: EMC Design Engineer
Google is seeking an EMC Design Engineer in Platforms Engineering who will play a key role in the development of one of the world’s most impressive computing infrastructures! Your objective will be to collaborate closely with our Hardware Design Teams to develop, test and qualify products to be compliant with the relevant worldwide EMC standards and regulatory requirements. This will involve engaging with various disciplines (Electrical, Mechanical, Thermal, Power etc) as early as possible in the R&D cycle to ensure compliance by design rather than retrofit at a later time. In addition you will be required to ensure all formal product certification documentation and labeling is in place for all deployment jurisdictions.
Responsibilities:
- Work closely with hardware design teams and suppliers to understand new project architectures and requirements and subsequently provide design input, develop test plans and conduct compliance testing to extract key data to validate that all EMC goals are met in accordance with the relevant regulatory standards and specifications.
- Resolve complex non-compliant issues by the most efficient and cost effective methods. Ensure findings, risks and recommendations are clearly communicated to the various cross functional teams.
- Co-ordinate the process of formal certification and subsequently maintain high quality product technical files and reports.
- Cultivate good working relationships with customers, external suppliers, test labs and manufacturing partners.
Requirements:
- Bachelor’s degree in EE, preferred, M.S. or PhD in EMC or related discipline desirable.
- At least 8 years hands-on EMC Design experience preferably with information Technology Equipment. Strong technical background and analytical knowledge of EMC and high speed design principles coupled with familiarity with a variety of software modeling tools.
- Good general understanding of hardware design constraints and tradeoffs and an ability to find cost effective work-arounds where feasible. Ability to simultaneously investigate multiple avenues to solve problems.
- Expert knowledge of international standards and procedures related to obtaining worldwide product certifications (e.g. FCC, CISPR, ICES, VCCI, etc.)
- Familiarity with test equipment such as spectrum analyzers, oscilloscopes, LISN’s, network analyzers, current probes, etc.
- Excellent understanding of product delivery lifecycles in a dynamic fast paced environment.
- Strong oral and written communication and interpersonal skills.
Smriti Khanna
Google
smritikhanna@google.com
Posted 9/16/2011
EMC Test Engineer
DENSO International America, Inc.
Southfield, MI
|
Job Description - External: |
||
|
||
|
Experience - External: |
||
Please contact: Jessica Sepienza |
Posted 9/13/2011
Sr. Engineer – EMI EMC FULLTIME
Location - Michigan
BSME or BSEE (minimum) from ABET accredited school 8 or more years EMC/EMI experience Experience testing military shelters to ASTM-E- 1851 a must Experience with IEEE Std 299 & C95 Mil-Std-461 experience a plus. Should already have GROL. Must be able to communicate (verbally and in writing) fluently to audiences representing a wide variety of skills, background, and disciplines. Exceptional problem solving ability is essential in this position, you will be responsible for the growth of our EMI program. You will be involved with various product families and Product Engineers to validate and improve our products. The job entails hands-on testing and leadership of Technicians involved with testing. You will be expected be analytical and well organized. This position will be a significant part of the technological growth of our dedicated team working on exciting products with government customers. Perform and lead EMI testing for shelters and components. Write Test Plans and Test Reports. Research and Development. Assist Quality Control with production units Support Product Engineers with EMI compliant designs. Problem solving and root cause analysis. Develop processes and procedures for EMI testing/validation. Manage schedules for testing. Manage test site, manuals, procedures and equipment. Ensure safe work environment. Responsible for licensing with FCC.
Cynthia Summers
VP of Sales
Executive Staffing Professionals,LLC (ESP)
csummers@executivestaffingprofessionals.com
214 418 4101
Posted 8/29/2011
| Job Title: | Electrical Engineer - EMI/EMC Design | Requisition Number: | 18955 |
||
| Functional Area: | Engineering |
Work Location: | Interiors
-(Electronic Systems Center) Phoenix AZ |
||
| Job Description Summary: | Position Overview: Because of a strategic commitment, Goodrich Corporation has initiated the creation of an Electronic Systems Center (ESC) headquartered in scenic Phoenix, AZ. The ESC will support a wide variety of Goodrich aerospace products with state-of-the-art facilities and expertise. The ESC team will design, test, build, and support electronic components and systems for all parts of the Enterprise. As an Electrical engineer you will be working in a focused, cross-functional team of engineers developing avionics products. Primary Responsibilities: Execution of Engineering Projects: - Executes new product design, value engineering and production support projects. - Establishes hardware design requirements, traceability and reviews customer flow down requirements. - Creates circuit designs and selects critical components for multiple programs for proper EMI & Lightning circuit protection. - Provides direction to mechanical packaging team for proper EMI enclosure design. - Supports development of DO-160 / MIL-STD-461 EMI Qual Plans, Procedures and Reports. - Oversees product setup and EMI testing at internal and external test facilities. - Provides troubleshooting and root cause corrective action expertise. - Primary engineering point of contact for customer EMI and Lightning protection questions. - Drives the usage of appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse and knowledge-management. Leadership: - Performs the full life-cycle development tasks with minimal amount of supervision and direction from the engineering manager. - Mentors and train junior engineers to improve their creativity, thoroughness, and technical savvy. |
||||
| Basic Qualifications: | Knowledge, Skills
and Abilities: Required: - BS degree in Electrical Engineering with at least 8 years of experience with a focus on EMI/EMC. - Experience with high reliability electronics. - Experience selecting EMI and Lightning protection components for Power Supply Inputs (28V, 270V and 3 Phase for 50W to 10kW systems). - Experience selecting EMI and Lightning protection components for Analog and Digital I/O. - Extensive Experience with DO-160 Sections 15 to 22 & 25, for products located in various locations of a composite aircraft. - Extensive Experience with LRU bonding and grounding per ABD100, D6 or equivalent. - Experience with Spice circuit simulation tools. - Complete development life-cycle experience: requirements, design, development, integration, and qualification. - Critical competencies: Customer Focus, Drive for Results, Technical Skills, Interpersonal Savvy, Commitment to Continuous Improvement, Effective Teamwork. - Eligible to work in the U.S.; citizenship, permanent residency, refugee or asylee status. Preferred: - MS degree in Electrical Engineering with a focus on EMI/EMC. - Experience designing and testing to requirements of MIL-STD-461. - Experience with Brushless DC Motors, AC Motors and high power switching circuits. - Experience with DO-160 Section 23 Direct Lightning Testing. - Experience with ARINC 429, 1553 and CAN. - Experience with 3D EMI field simulation tools. - Experience with REACH and RoHS regulations. - FAA/EASA certification/regulation experience. - Exposure to HDL or software developed, designed and tested according to the requirements of DO-178B Level A or DO-254 Level A. |
||||
| % Travel Required: | 10 - 20% |
||||
We are looking to hire immediately, the position is for full time employment in Phoenix Arizona at the Goodrich Electronic Systems Center.
Please ask interested candidates to apply online at www.goodrich.com
Req # 18958 Electrical Engineer V - EMI/EMC Design (10+ yrs)
Req # 18955 Electrical Engineer IV - EMI/EMC Design (8+ yrs)
Posted 8/24/2011
We are currently working with a client in East Tennessee to help them find EMC Engineers for their Nuclear Consulting business. Our client focuses their efforts in testing of process instrumentation and development of specialized test equipment and software products for power and process industries and has been the leading supplier of equipment, training, and services for in-situ response time testing and on-line calibration of temperature and pressure instrumentation in nuclear power plants.
The EMC Engineer performs engineering work of various types to collect and analyze data at customer's sites using specialized data acquisition equipment and analysis software that is designed and manufactured for the client’s purposes. The EMC Engineer will confer with other engineers, clients and others to discuss existing or potential project issues and challenges. He/she will perform EMI troubleshooting of I&C and Power Systems and will work with site personnel to perform necessary root cause analysis for problem solving. Report writing will also be a key component of this role as will maintaining excellent interpersonal relationship both within the company as well as with client contacts.
You can download a complete description of this role by clicking this link.
The ideal candidate will have ten years minimum experience with five years of field experience solving industrial power, instrumentation and control, and noise issues, and/or five years of experience in an EMC discipline. He/she will also have an ABET accredited BS or an MS degree in electrical or electronics engineering. A iNARTE EMC Engineer certification or other similar professional registration is a plus.
If you are interested in this role, please reply with an attached Word copy of your resume and salary history. If you are not interested personally, I would encourage you to pass this along to others who may have an interest in this role.
Thank you for your assistance!
Dan Ryan
Principal
4322 Harding Pike-Suite 417
Nashville, TN 37205
615 656 3535 office
615 202 0883 cell
Posted 8/11/2011
Wanted:
ISO 17025 and Guide 65 Assessors
The
American Association for Laboratory Accreditation (A2LA) is seeking technically
qualified individuals interested in serving as paid, technical assessors to
conduct ISO/IEC 17025 and/or ISO/IEC Guide 65 assessments of testing
laboratories and product certification bodies.
Ideal
candidates will have the following qualifications:
n
10+
years experience in EMC/Telecom/Radio industry
n
Knowledge
of FCC equipment authorization processes
n
Knowledge
of APEC TEL MRA and related economies
n
Experience
with Quality Management Systems
n
Great
Organizational and Communication Skills
Please send
resume to:
Trace McInturff
A2LA
Operations Manager
Posted 7/13/2011
Senior Compliance
Engineer
Garmin International - Olathe, KS (Kansas City, Missouri Area)
Job Description
GARMIN International, the world leader in GPS technology is growing at a rapid
rate. We are on the hunt to find the best and the brightest individuals to work
for our firm. At this time we are in need of a Senior Compliance
Engineer. The selected candidate will play a leadership role to
coordinate and manage regulatory standards activities and product compliance
approvals for Garmin consumer products
ESSENTIAL FUNCTIONS:
•Ensure GPS development teams’ success in designing to meet worldwide Safety,
EMC, wireless and SOLAS regulations
•Generate regulatory compliance plans to guide EE and ME design, manufacturing,
test, EMC prescreen and technical publications functions
•Responsible for the accuracy of the regulatory strategy, satisfaction of our
internal and external customers, as well as not becoming a gate to product
launches
•Effectively track, manage and support multiple projects and priorities,
develop general process guidelines
•Mentor less-experienced Compliance Engineers
•Provide additional leadership in cooperation with the team leader and other
functional teams
•Perform job functions independently with minimal direction from supervisor
•Gain understanding and apply detailed knowledge of Garmin processes and procedures
OTHER RESPONSIBILITIES:
•Act as a company knowledge resource for regulatory compliance information
•Provide guidance on correct product labeling requirements
•Provide compliance training to Garmin personnel as necessary
EDUCATION, EXPERIENCE, AND SKILLS REQUIRED:
•B.S. or M.S. Degree in Engineering, Electro-Optics or Physics 8+ years
experience as a GARMIN International Compliance Engineer or 10+ years
experience as a Compliance or Regulatory Approvals Engineer, performing duties
similar to the essential functions of this job description
•Knowledge in worldwide regulations and certification schemes for radios,
products with wireless handsets and consumer, marine or automotive electronics
and/or secondary Lithium batteries
•Proficiency in understanding and interpreting several of these standards (SAR,
UL, , IEC, NOM, CSA, FCC, CISPR, Industry Canada, ETSI, ITU, JASO, SAE, ACMA,
NZS, ANATEL, ICASA, SOLAS, GB) and directives (R&TTE, Battery, LVD, EMC,
eMark, ELV, UN ECE, Recreational Craft, EuP)
•Experience with product safety, ESD, EMC and EMI testing with proven ability
to review designs and offer suggestions for improvements
•Strong project management and problem solving skills
•Excellent verbal and written communication skills
•Highly motivated and self-directed
•Strong computer skills and knowledge of Office applications
DESIRABLE QUALIFICATIONS:
•Experience in working with regulatory and standards organizations
•Marine communication and/or navigational electronics standards (SOLAS or
non-SOLAS). Marine autopilot standards & certifications
•Certification of products with any of these technologies: Wi-Fi, Bluetooth,
DVB-H, VHF, EPIRB
•Knowledge of CTIA and PTCRB process
•China, Korea, Japan or Latin America approvals expertise
•Experience with safety approvals for products using rechargeable Lithium
batteries
•Experience in writing compliance reports and declarations of conformity
•Willingness and ability to travel domestically and internationally
EEO/AA/M/F/D/V
If you are interested in this position please apply directly at www.garmin.com
or contact me directly at brad.mason@garmin.com
Brad Mason
Technical Recruiter / Garmin International
Office 913-440-2527 / Mobile 913-549-8827
www.garmin.com/careers
Posted 7/13/2011
The following opportunity is available in Holland, MI. If you are interested in moving forward as a candidate for submittal, please see the instructions following the job description (below).
Title: EMC Engineer
Location: Holland, MI
Company: Automotive Supplier
Contract: 7 months+
Your
Responsibilities:
As part of our
global team you will be responsible for Electro-magnetic Compatibility (EMC)
Engineering by:
*Ensuring electronic product EMC compliance to automotive EMC standards
*Reviewing conceptual product designs for EMC risks
*Reviewing mechanical enclosure and shielding designs with the designers
*Improving schematics and PCB layouts by reviewing them with the designers
* Performing EMC simulations using Mentor Graphics Hyperlynx, CST PCBStudio, MicroStripes & CableStudio
* Correlating simulation models to physical test measurements
* Performing EMC pre-compliance testing according to internal JCI test methods
* Collaborating with Johnson Controls’ EMC experts around the world
* Presenting EMC investigation reports to internal JCI program team and OEM customer audiences
* Presenting EMC training concepts internally to JCI engineering staff (ie. Hardware, PCB & Mechanical design teams)
Requirements:
* BSEE +
5-6 yrs experience or MSEE + 3-4 yrs EMC experience
* Education in Electrical Engineering, Physics or related field accepted
* Analytical approach to problem solving
* Good practical knowledge of CAD/ CAE tools (preferably Mentor Graphics &
CST tools)
* Previous experience with solving EMC issues by performing simulations,
running tests, analyzing and reporting status
* Excellent English communication skills (written and verbal)
* Ability to successfully interact and communicate with people from other
cultures and those who speak other languages
* Experience with Labview is preferred
* Desire to gain new knowledge and skills
If you would like to be submitted for this opportunity, please e-mail an updated resume that includes beginning and ending MONTH and YEAR of each position held; demonstrated experience and skills (in the above description) shown in the positions you’ve held (not just in the Summary); and at least 2 professional references (managers and/or supervisors). I will contact you after receiving this information from you.
Maggie Johnson
Recruiter
Ph: (770) 508-8124
Toll Free: (877) 457-8630
Email: maggie@iconma.com
Website: www.iconma.com
Linked In: www.linkedin.com/pub/maggie-johnson/8/9b8/725
Posted 6/7/2011
Job Title: Component EMC
Engineer
Employment Type Full Time - Percent Travel 10
Physical Location Chrysler Headquarters & Tech Center
Position Description: Component EMC Engineer
Required Qualifications
Minimum Bachelor's Degree in Electrical Engineering for an ABET accredited
university
EMC experience/training.
2 years of experience in an Electrical/EMC Testing, Design, or Laboratory.
Familiar with RF Test Equipment and EMC Test Specifications.
Other Requirements
Knowledge and experience using MS Office Suite.
Compensation
The ideal candidate can anticipate a competitive and attractive salary and
benefit package.
Location: Auburn Hills, MI
Rob Kado
Manager & Technical Specialist
Chrysler
800 Chrysler Drive
CIMS 481-47-20
Auburn Hills, MI
48326
Please e-mail resumes directly to Rob Kado.
Posted 6/3/2011
EMC Engineer
An Electromagnetic Compatibility (EMC) Engineer performs engineering work of various types to collect and analyze data at customer's sites using specialized data acquisition equipment and analysis software that is designed and manufactured for the purposes of As such, the engineer should:
|
· Have ten years minimum experience with five years of field experience solving industrial power, instrumentation and control, and noise issues, and/or five years of experience in an EMC discipline · Be willing to travel 30% of the
time, Have strong troubleshooting,
organization and documentation abilities, Possess experience in project management, preparing, analyzing, and
managing budgets, Have a strong work ethic with
excellent interpersonal skills, Have excellent problem solving techniques and
the ability to effectively multitask, Be able to work with minimal direct
input by management, Be able to convey technical results effectively to other
technical staff and to clients, Have a strong questioning attitude and
troubleshooting mentality, Have clear and concise verbal and written
communication skills, Have an ABET accredited BS or an MS degree in
electrical or electronics engineering, A iNARTE EMC Engineer certification or
other similar professional registration is a plus, Be familiar with medium
and low voltage power, grounding and shielding, and I&C systems,
Experienced in power and signal monitoring, and use of test instrumentation
such as oscilloscopes, spectrum analyzers, data acquisition systems,
etc. |
|
As an EMC Engineer, the candidate will: |
|
Must be a U.S. Citizen
The pay rate is
open and there is relocation offered.
Toby Gambill
Engineering
Recruiter
Office (865)-246-2852
Cell (423) 912-8188 | Toll Free (866) 788-9737
1626
Downtown West Boulevard, Knoxville, Tennessee 37919
mforce
Providing
Engineering, IT, Manufacturing and Accounting/Finance Professionals
Visit us
at www.mforcestaffing.com
Visit Talent Rooster www.talentrooster.com to submit your video resume.
Posted 5/23/2011
Position: EMC/EMI
Engineer, Moog Inc.
Location: East
Aurora, NY, Corporate Headquarters
This position is
responsible for development of complex electrohydraulic, electromechanical,
mechanical, hydromechanical and electropneumatic components and systems that
will become the new products of Moog, Inc. The incumbent plans and conducts
efforts requiring judgment in the independent evaluation, selection, and
substantial adaptation and modification of standard and nonstandard engineering
techniques, procedures, and criteria. The Senior Design Engineer independently
devises new approaches for the problems encountered and plans and coordinates
the work of others.
Person accountable for
review and analysis of electrical and mechanical designs for EMC/EMI compliance
to Mil-Std-461/462, DO-160 standards.
ACCOUNTABILITIES:
1. RFI/RFP -
Budget/Schedule/Equipment
2. EMC Requirements
Definition and Validation
3. Grounding and
Protection Design Architecture
4. EMC Control Plans
& Checklists
5. IDR, PDR, CDR
Support
6. EMC Troubleshooting,
Training and Mentoring
7. Manage Site
Operation Manuals, Test Procedures & Reports
8. Standard EMC
Lifecycle Process
9. EMC Test Lab
Support:
• Dev. & Qual.
Testing
• Capital
Resources/Test Equipment
• Lab Qualifications
• Outside Testing
Resources
10. When applicable
supervise subordinate engineers and project
EDUCATION AND
EXPERIENCE:
• BS Degree required,
MS preferred
• 10 year minimum
experience testing, designing and working with EMC/EMI
• Proven record of
accomplishments including successfully developed and produced designs and a
demonstrated ability to participate in and/or lead a product design team
• Must be able to
communicate (verbally and in writing) fluently to audiences representing a wide
variety of skills, background, and disciplines
• Exceptional problem
solving ability is essential
CITIZENSHIP
REQUIREMENTS:
Due to U.S. Government
and Military contracts candidates must be either a U.S. Citizen or Green Card
holder.
Please apply on-line
at: https://www.moog.apply2jobs.com/ProfExt/index.cfm?fuseaction=mExternal.showJob&RID=3097&CurrentPage=1
Lauren Watson
Staffing Services
Moog Inc.
East Aurora, NY
(716)805-2587
lwatson@moog.com
www.moog.com
Posted 5/11/2011
Program Engineer – Electromechanical Valve Applications/Fluid Systems
Leading global automotive supplier, offering solutions in multiple diverse product lines in multiple global segments of the industry, is seeking innovative driven engineering candidates for their dynamic fluid systems team. Company offers a fast paced team driven working environment. Excellent compensation package inclusive of base salary with a 10% bonus, full medical, dental, vision and 401K with a competitive matching option up to 5%
Electromechanical Valve
Applications Program Engineer
SUMMARY
Assist with the Design, development,
validation and therefore expand strategic technology product portfolio from
conception, launch to obsolescence. These responsibilities specifically include
the following:
· Facilitating CFT meetings at
the customer, development of customer specific timelines, and driving open
issues around customer specification applications which tie back to market
trends.
· Supporting product
construction which is designed for manufacturing and robust validation to
internal and external OEM specifications.
· Responsible for timely Wind
Chill system updates; internal and external customer support including project
tracking reports;
Assist with component
failure analyses on an as needed basis. The focus will be in the area of
electro-mechanical valves and thermal management systems.
PRIMARY RESPONSIBILITIES
Help with the design, development, validation and expansion of strategic
technology product portfolio. Facilitate specific customer CFT meetings and
specific development timelines including the development of an open issue
matrix. Manage Wind-chill, customer level drawings, L.T.R.’s &
ADVP&R Develop, implement, track, and report the Project Design
Validation Plan and Report (DVP+R) Coordinates product, mating
components and subsystem testing with the customer and/or suppliers for
validation purposes. Aid in the development of standardized design
validation test procedures. Assist in collecting and analyzing VOC data
so effective benchmarking can occur. Must demonstrate the ability to work
closely with manufacturing personnel, both inside and outside the company,
therefore retaining a focus on DFM. Assists with design and
manufacturing quality concerns and failure analysis.
KNOWLEDGE AND
SKILL REQUIREMENTS
Bachelor’s Degree in Electrical Engineering with a strong mechanical
aptitude. Minimum of 6-8 years experience with Electromechanical
devices & EMC experience. Previous experience with Valves,
Thermal management Systems and Fluid Handling Systems is highly
desirable. Familiarity with microprocessor integration or programming is
highly desirable. Motor Design and testing is a plus.
Innovative engineering skills with strong cross functional communication capabilities,
who is confident and highly articulate in relaying technical information
to customers and internal teams. Working knowledge of DFMEA, DVP&R,
APQP, DOE and GD&T. Working knowledge of materials and
processes required to manufacture of plastic, metal, rubber and composite
materials. Working knowledge of customer development processes and
engineering change process. Proficient in Microsoft Office applications.
Contact:
Melissa Peterson
Peter James Inc.
248-426-9444
Cell: 248-346-5999
Posted 4/27/2011
Job Title: SR. EMC ENGINEER
Job Summary: With little assistance, design the electro-magnetic compatibility portion
of products.
Reports to: Engineering Manager
Job duties: Assist in establishing EMC design criteria to meet customer
requirements. Design EMC portion of unit per design specification (-680) or per sales design data or per individual customer specification. Recommend, maintain, and utilize EMC based software to aid in design of EMC portion of products. Coordinate activities of printed circuit board designers. Supervise other engineers and technicians assigned to a
particular job or project prototype, having design reviews as necessary. Recommend and operate EMC lab equipment required for in house compliance testing. Record design and test data. Release to Mechanical Engineering section when design has
been confirmed, with
approved schematics and stress information. Use standard parts when
possible and supply stress information on all components in design. Write
theory of operation (-640). Verify correctness of final schematics,
printed circuit boards and bill of material. Assist Technical Writer in
writing manual and sales bulletin on products designed. Estimate material
and engineering effort required on jobs being quoted. Keep current
engineering estimate sheets and work schedules. Generate quotes in
response to sales/marketing inputs. Perform other duties as assigned.
Travel Requirements: Travel
as required for training, support of project tasks, product issues, or other
design or job related needs.
Education/Training: BSEE or equivalent.
Experience: Six years electrical design experience in the area of EMC. Embedded hardware design experience
Ava Andrews
Direct Hire Team
Lead Atlanta Hub/ Technical Recruiter
Office: 770.481.4681 | Email: ava.andrews@cdicorp.com
Mobile: 678.886.9818 | www.cdi-its.com
"Ranked One of the Most Trustworthy Companies in
America
three years
running..." - 2009 Forbes Magazine
Posted 3/30/2011
Position: EMC Evaluation Engineer
Company: Alpine Electronics of America, LLC
Alpine Electronics of
America, Inc. is the industry-leading manufacturer of high performance mobile
electronics, founded in 1978. Alpine is the only manufacturer specializing in
mobile multimedia, an integrated system approach incorporating digital
entertainment, security and navigation products for your mobile entertainment.
As a consolidated subsidiary of Alps Electric Co., Ltd., one of the world's
premier manufacturers of electronic components for computer, communications and
car electronic equipment, Alpine is the specialized supplier of quality mobile
electronics systems.
The EMC Evaluation Engineer applies electronic theory and related knowledge to
test and modify development or operational machinery and electrical control
equipment and circuitry by performing the following duties. The Engineer will
reside at the Alpine Farmington Hills location.
Responsibilities of this role include but are not limited to the following:
* Provides general technical support, including design and development of
internal laboratory procedures to aid in the day-day activities of the
Evaluation Center.
* Responsible for software validation, microcomputer replacements and related
product rework. Diagnoses the root cause of electrical or mechanical
malfunction and/or failure of products.
* Is responsible for engineering, design and production validation testing
according to customer specifications. Including Mechanical, Environmental and
Electromagnetic Compatibility testing.
* Provide a professional level of documentation for ED, DV and PV testing,
evaluation, data analysis and day-to-day tasks that are assigned.
* Modifies electrical/electronic prototypes to correct functional deviations
under direction of immediate supervisor in conjunction with supervision of
engineering staff.
* Performs preventive and corrective maintenance on laboratory equipment.
* Implement design and process verification plans for Reliability testing and
EMC testing,
* Assist in maintaining ISO 17025, AEMCLRP and FCC accreditation's.
Qualifications:
The desired engineer will meet one of the following education requirements:
* iNARTE EMC Engineer certification.
* BSEE with minimum 5 yrs experience in EMC laboratory.
* MSEE with minimum 3 yrs experience in EMC laboratory.
* Associates Degree with minimum 10 yrs experience in EMC laboratory.
Additional qualifications include:
* Experience with documentation requirements for ED, DV, and PV testing
* Hands on experience with Chrysler or GM testing specifications
* Experience conducting tests in line with AEMCLRP, FCC, and ISO 17025
* Ability to work independently and as part of a team
* General competency in the core fields of mechanical, electrical, controls,
and software
* Excellent oral and written communication skills
* Strong organization and documentation abilities
Please apply directly online at: http://www.alpine-usa.com/company/careers
We offer competitive salaries with an excellent and comprehensive benefits
package and a great work environment. Alpine values its members as individuals,
and is committed to forming an energetic and attractive company where the
quality of work is enhanced.
Posted 1/24/2011
Our client, a specialty equipment OEM, is looking to hire a Sr. Test Engineer to plan, design and execute technically meaningful tests for electrical / electronic parts for the OEM product’s electrical subsystems.
This position is located at their state of the art RF/ EMC lab in Milwaukee WI.
*This company is one of the Top 10 to work for in US and provide the following:
A culture that values and encourages employee participation in decision-making
High-quality and very desirable products, casual atmosphere, great customers
Successful business performance with years of record growth
High global brand recognition, record financial results and overall good company reputation
Outstanding benefits to include bonus (achieved company wide last 5 years) and company fully paid health benefits
The primary focus of this position is The Sr. Test Engineer will:
- Accurately compile, analyze and
report test results in a timely manner with the goal of reducing product
development lead times to include defining test protocol, tracking work
requests, analyzing results and coordinating the necessary resources to
perform the tasks necessary.
- Develop component, subsystem
and vehicle test plans from documentation and test requirements.
- Work collaboratively with
project engineers, technicians to produce detailed test methods, work
instructions, time lines and cost estimates.
- Test methods will be documented
in work instructions or in automated test software.
- Test set-ups will be defined
for standard and developmental tests, and technicians will be directed
during test execution.
- Detailed test reports will be
produced, and the methods and results will be presented to project leads
and management
Requirements:
- BS Electrical
Engineering REQUIRED Master degree ideal
- 5+ years experience in an
electrical / electronics automotive test laboratory to include
Environmental testing and reliability (Experience in ISO or NVLAP
accredited laboratory is an advantage)
- Experience in radio frequency (RF)
or electromagnetic compatibility (EMC) required, NARTE EMC engineer
certification preferred
- Experience in writing test
plans, developing test procedures and implementing test methods
- Familiarity with operation of
oscilloscopes, data acquisition equipment, measurement techniques and test
automation
- Programming experience
required, Labview knowledge is a plus.
- Experienced with
electrical test equipment (i.e. DMM, oscilloscope, spectrum analyzer,
power meter, signal generator, pulse generator, arbitrary function
generator, audio analyzer, RF amplifier, network analyzer, etc.
- Serial data bus test experience
required (CAN tools, J1850, USB)
- Domestic and international test
standards for environmental, electrical and electromagnetics, including ANSI,
IEEE, IEC, CISPR and SAE.
- Ability to lead, mentor develop
others as promotion to lab manager is quickly possible
- Must be US
citizen or permanent resident- No sponsorship provided
Top salary + annual company performance bonus
Great benefits and opportunities for advancement
Relocation provided
Suzanne Griffith
President
J S Griffith and Associates (BQ48)
Desk: (614) 718-9933
Fax: (614) 793-2806
e-mail: suzanne@jsgriffith.com
web: www.jsgriffith.com
Posted 1/21/2011
TRW Automotive is headquartered in Livonia, Michigan has 63,600 employees and contractors worldwide in approximately 185 facilities in 26 countries. TRW Automotive serves all major original equipment vehicle manufacturers worldwide and is a leading developer and supplier of active and passive safety systems. TRW Automotive ranks among the world’s leading automotive suppliers.
Senior Product Test Engineer
Primary Position Responsibilities:
Duties will include reviewing test procedures and developing product specific EMC test plans. Supervise and perform EMC tests to determine compliance to domestic and international regulatory standards, analyze results and perform diagnosis of problems and recommend solutions. Candidate should be able to prioritize tasks effectively and handle various tasks at the same time. Must be team oriented with excellent communication skills.
Experience and Skills Requirement:
3 years of experience with design for EMC compliance, PCB layout, grounding, hands on experience with test and measurement equipment in the related field. Extensive experience with troubleshooting and solving problems related to ESD immunity, RF emissions, and power line anomalies. Solid understanding of automotive test specifications. Hands on experience with set up and operation of RF test equipment. Good writing and communication skills (desired 5+ years EMC test and automotive product development and project management experience).
Education:
BSEE or related field with an emphasis in antennas and electromagnetics. NARTE certified preferred.
Cindy
Trotta
Contract
Recruiter
TRW
Automotive
12001
Tech Center Dr.
Livonia, MI 48150
Fax: 734-855-3319
Phone:
248-699-4117 Farmington Hills
Phone:
734-855-3219 Livonia * leave messages*
Posted 11/17/2010
Senior Electrical Engineer
Sirius XM Radio has an immediate need for a Sr. Electrical Hardware Design Engineer, whose primary responsibilities will be the design of OEM and aftermarket satellite receivers and the architecture development of advanced product concepts and new module reference designs.
Duties and Responsibilities:
· Work under the direction of Core Engineering Manager to define and develop the reference circuits used within our products, to manage the activities of junior engineering partners, and to develop and manage programs both internally at Sirius and with Sirius receiver partners.
· Define, design, and develop the interface and support circuitry needed to integrate the Sirius Satellite Radio chipset. Circuits include linear and switching power supplies, microprocessors, audio analog circuitry, amplifiers, digital interfaces (CPLD & FPGA), RF circuits, memory, Serial and USB interfaces.
· Provide input and design support for advanced product concepts. Develop quick turn prototypes that can demonstrate to Sirius Sr. Management new product concepts and features.
· Serve in a technical leadership position. Provide instruction and mentoring support to promote the engineering skills of subordinate engineers.
· Serve as a technical resource and interface for Sirius Satellite Radio supporting receiver manufacturers in their efforts to integrate the chipset to develop and bring second and third generation products to market.
· Generate product specifications, test procedures, analysis, and reports.
Minimum Qualifications:
· A BSEE degree is required for this electrical design position along with significant amount of design experience.
· MSEE degree is a plus.
Requirements and General Skills:
· Excellent written and verbal communication skills
· Must have legal right to work in the U.S.
Technical Skills:
· At least ten to fifteen (10-15) years of successful relevant hardware circuit design experience. Experience in a relevant product area is an absolute requirement. Several acceptable product areas might be:
o auto sound manufacturers (headunits, CD players, amplifiers, telematics, navigation etc.)
o cellular telephone manufacturers
o satellite receivers
o embedded systems development
o audio consumer electronic product development
· Experience is sought in at least three or more of the areas below:
o Multiplex & Network Communication system development
o Wireless & Digital communications
o High speed digital logic design
o EMC testing and analysis
o Low EMI PCB layout and Signal Integrity Analysis
o Embedded micro controller design, middleware integration, and software development
o Satellite, telematics, navigation receiver design
o Power supply, displays, rechargeable battery, and analog audio circuitry design.
o GPS receivers
o Digital video receiver and displays
o Advanced DSP based audio systems
· The successful candidate will have an understanding of the consumer electronics and / or automotive OEM electronics product development process — product planning, prototyping, specifications, testing, quality, documentation, etc. Effective past and current relationships with counterparts among consumer electronics and automotive manufacturers would be a major plus.
· Development experience of antennas and/or RF front-end is a plus.
· A high-level of personal computer proficiency is required, including experience and familiarity with project planning, engineering software (Visio, SPICE, simulation, MathCAD, Matlab, etc), Microsoft Office and the Internet.
·
Knowledgeable in the use
of electrical schematic capture and simulation (RF, analog, & digital) CAE tools
is required. PCB layout, and signal integrity analysis experience is desirable.
SEND RESUMES TO victoria.rizzo@siriusxm.com